Looking for a high quality, weapon mounted tactical light? The Streamlight TLR-1s is the tactical flashlight you’re looking for. It is lightweight and compact, featuring the latest in shock-proof power LED technology. The Streamlight TLR-1 mounted light is available in 300 and 800 (HL) lumen versions, the TLR-1s can operate in momentary, continuous, and strobe mode. Imagine the impact on an intruder of 800 strobing lumens! Unit activation is quick and easy using the ambidextrous, rear mounted paddle. A simple flick of the finger puts this bright tactical light into operation.
The TLR-1s has an integrated rail clamp designed to rapidly attach/detach from any MIL-STD-1913 (Picatinny) rail. Includes keys for Glock-style, Picatinny, Beretta 90two, S and W 99 and S and W TSW rails. The light securely fits a broad range of weapons.
The housing is made using 6000 series machined aircraft aluminum with black anodized finish. The lens is made with high temperature, shock mounted, impact resistant Boro Float glass. The deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination.
This high quality tactical light has been extensively live-fire tested and once again shows why Streamlight is a top name in tactical lights for the discerning consumer.
- 3.39 in. length, 1.47 in. width, 1.44 in. height
- 4.18 oz with batteries
- Impact resistant construction.
- Operating temperature: -40°F to +120°F.
- IPX7 rated design, waterproof to 1 meter for 30 minutes.
- Uses 2 CR123A Lithium batteries (included)
- 300 lumen – 2.5 hours of continuous run time.
- 800 lumen – 1.75 hours of continuous run time.
GUN COMPATIBILITY –
BERETTA:
Cx4 Storm (carbine/rifle) – TLR fits with 1913 key.
Px4 Storm
(Pistol) – TLR fits with standard key.
NOTE: M lights are VERY loose.
Vertec –
New polymer key – 1913
Older aluminum key – GL (Standard).
CZ:
P-01 – Should work with GL (Standard) key. (Not tested; based
on similar European version)
FN:
5.7 (with Picatinny style rail) -1913 key.
GLOCK:
Any with rails – GL (Standard) key
Cannot fit Glocks that ARE NOT equipped with factory rails.
After installing a contour remote on a TLR-2 equipped Glock it will
likely be necessary to rezero the laser.
HK:
USP (full size) uses our HK adapter 69085 with a GL (Standard) key.
(compact) uses our HK adapter 69091 with a GL (Standard) key.
HK P30 -1913 key.
NOTE: The rail tilts down slightly from the bore. This may result in
laser zeroing difficulty closer than 50 feet (depending on the tolerances of the pistol and laser).
KIMBER:
TLE RLII
(1911 with rail) – Picatinny key.
RUGER:
KP345 – GL (Standard) key.
SR-9 – GL (Standard) key
SIG SAUER:
GSR or 1911 Style with flat bottom rail – Picatinny key.
ANY ALUMINUM FRAME SIG WITH A ROUND BOTTOM RAIL:
Including the P220R, P229R, etc. The Sig round bottom rail
departs from the true shape of both the 1913 and Universal
standards and may cause an improper fit. The TLR will work with
the 1913 key but THERE WILL BE DAMAGE to the finish of both
the gun and the light. The retaining screw must be TIGHT.
SP2022 – Polymer frame. Same comments as for aluminum
frames, EXCEPT that the polymer frame is a little thicker and does
not show marks from a clamp because it is molded from black
material. PER SIG, the TLR with the 1913 key works.
SMITH & WESSON:
On the TSW and 99 models, the slot is too far back for the
standard key and requires the special S&W key. There are many
different models of TSW, but as long as it’s a TSW WITH A RAIL, it
uses the S&W key.
Smith & Wesson M&P autoloader takes the Picatinny key.
SIGMA – Cannot fit
SPRINGFIELD ARMORY:
Operator (1911 with rail) – Picatinny key.
XD (4 & 5 inch barrels) – GL (Standard) key. Cannot fit 3” barrel
.
WALTHER:
99 – New (2004 models) FULL SIZE ones are nearly the same as
the S&W 99 and use the S&W key.
Older ones (no slot across the rail and the side grooves
CLOSED in front) cannot
be fitted
with a TLR.
99 Compact – Cannot fit. Rail is too short.
P22 Cannot fit. Non-standard rail.
