How to Choose a Beretta Rail Adapter

Hardware Accessories for Guns: Beretta Rail Adapter

My first pistol was a Beretta 92FS and I think I could have used it as a pry bar and a hammer and the Beretta would ask for more. It’s no wonder there are millions of them around the world used by the military, police, security and folks like us. One strange thing about the Beretta 92’s is most, if not all, are manufactured without an accessory rail. This makes it tough to attach a laser or tactical flashlight unless you purchase an aftermarket accessory Beretta rail adapter.

When shopping for a Beretta rail adapter, there are a few things to look for.

1. Determine if your Beretta has a straight (older models) or angled (newer model) dust cover. Make sure the Beretta rail adapter fits your particular design.
2. What material is used to make the Beretta rail adapter?
3. Will the adapter damage the pistol’s finish?
4. How many slots are in the rail?  The more the slots, the more accessories can be used.

Here are the top three popular Beretta rail adapters.

Surefire MR11

If you are into flashlights, you know the Surefire name. They make a great product and they are not shy about charging you for it. The bulk of the rail adapter is made from aluminum while the part that attaches to the trigger guard is constructed from polyurethane so it is less likely to scratch the finish.

This adapter also uses a small “anti-chafing” pad to reduce scratching the Beretta’s dust cover. It’s secured to the pistol by tightening the trigger guard locking wedge using a shell casing which works great in the field. It’s also the thinnest adapter on the market and the second lightest adapter I have seen.

Pro: The thinnest rail adapter on the market.

Con: The single notch on the rail limits accessory placement plus the $108.00 retail price tag makes it the most expensive I have seen.

Insight/EOTech CFL-600

The entire rail is constructed from aluminum and is attached to the Beretta by screwing down an Allen head which applies pressure between the dust cover, adapter and the trigger guard. I do not have personal experience with this adapter and information on it is extremely limited.

Pro: Constructed from high grade aluminum.

Con: Looks like it will mar the dust cover and the metal Allen head will leave marks on the trigger guard. Depending on the serial number of your Beretta, retail is $76.00 or $103.00.

TRG EZ-Rail

This is the Beretta rail adapter that we sell here at Gunner Security. I have a lot of experience with this adapter. It’s easy to install and has been tested and approved by Colt, M1911.Org, Navy Seals, US Special Forces, and Military Police around the world.

It’s made from Delrin, which is an extremely durable high tech plastic used to make replacement body parts and other industrial products.  It has a high tensile strength, does not crack or chip and resists moisture absorption.

To install the rail adapter, depress the disassembling latch release button on the Beretta, slide the adapter against the trigger guard and position the open slot in the adapter over the disassembling latch release button. Screw the Teflon screw down until it just makes contact with the trigger guard.

Pro: Will not scratch or mar the pistol’s finish, has 3 notches which allows mounting of many types of accessories, can be set up for easy on/off or permanent attachment, the lightest weight on the market and also fits the Taurus PT92AF. Retail price $50.00

Con: The adapter is a little thick.

Well there you have it. My favorite is the TRG because of its affordability, versatility and it will not damage the pistol’s finish.